Monkey Tree – monitor stand

MonkeyTree is the natural home for our species. The Monkeys feel well while standing relaxed and decoupled from the ground.

Our Monkeys love Heavy Metal – thats why we made the Monkey Tree out of massive Material to guarantee a solid stand.

One set contents 1 Pair of MonkeyTree

The MonkeyTree is available with two different pipe-lengths. Please select between 750mm (29.53in) and 1000mm (39.37in)!

The MonkeyTree fits to Turbo 4, Turbo 5, Turbo 6 and Turbo 8.

Mixing100%
Mastering100%
DJ Monitoring80%
Multi Media / Gaming100%
Installation70%

Technical specification

Type Monkey Tree 75 Monkey Tree 100
Height: 750 mm
1.000 mm
Weight: 12,0 kgs
26,46 lb
12,5 kgs
27,56 lb
Max. weight: 70 kgs
154 lb
70 kgs
154 lb
Dimensions of the base plate: L 240 mm x W 165 mm
L 9.44 in x W 6.5 in
L 240 mm x W 165 mm
L 9.44 in x W 6.5 in

FAQ

I bought my Monkey Banana Loudspeakers in a country with 230V/50Hz mains power. Can I also operate them with 220V/50Hz?

In principal, the loudspeakers can be used in the voltage range specified +/-10 % without any problems. Some models have a switch on the back to switch between 110V/60Hz und 230V/50Hz input voltage. Please make sure that the switch for selecting the voltage is set correctly!


 

I would like to operate my Monkey Banana monitors with a notebook. Which cable do I need?

In most cases, a high-quality y-cable from 3.5-mm-cinch to 2 x 6.3-mm-cinch is sufficient. It is also possible to operate the loudspeakers over a USB-Interface.

Please note: some notebook power supplies cause interference affecting audio-output. If whistle or hum is audible, please unplug the power supply.

Unpleasant background noise can be supressed by using high-quality audio-cables. If this also doesn’t help, the audio-signal has to be galvanically separated. Suitable transformers are available from specialised retailers.

 


 

What is the ideal set-up for my Monkey Banana loudspeakers?

The ideal distance to your ear is 1.5 m, whereby the loudspeakers should form an equal sided triangle to the monitoring position. The area between the tweeter and the woofer should be at ear height.

It is also important not to place the loudspeakers too near to the wall, as the bass reflex horn is at the back. The distance for optimal functionality is 20 cm.

Furthermore, the room should be optimised acoustically, to eliminate reflections and standing waves.

To de-couple from the surface, we recommend the use of a high-quality absorber. We offer the Monkey Base, which is suitable for our loudspeakers and provides optimal de-coupling.


 

One of my loudspeakers is silent, what now?

Please switch the right and the left loudspeaker, leaving the cables in the original position. Through this, you can eliminate the possibility of the fault being caused by the signal source or mains socket. If the fault “wanders” with the loudspeaker, it is technically defect. In this case, please contact your retailer or the Monkey Banana team, we will help promptly!


 

I have to return a loudspeaker because of a technical defect, what do I have to observe?

The loudspeaker must be well packed (ideally in the original packaging) so that it is not damaged during transport.

Please include a return address, a copy of the bill and a short description of the fault, this is crucial for us to be able to handle the issue promptly!